|
Stub This page is not fully complete and it needs more information. Please contribute here if you can find any more information as you can! | |
Virtual processors are wire-layer buildings used to virtually assemble shapes on the wires layer. It can be unlocked and used when completing level 25; after delivering 25k of 
shapes.
They can be useful for analyzing the current goal shape the HUB request for; breaking it down into steps by using any individual type, into basic quadrants.
An example of the Virtual Cutter being used (from the shapez.io website)
The Virtual Cutter is a wire-layer building that displays the following object cutting into two halves inputted from the following shape. The wires outputted from the virtual cutter are the outputted shapes that are cut, making the use for other type of buildings that can go through from the Virtual Cutter.
Unwanted shapes outputted from the virtual cutter do not to be trashed, but instead ends in a dead end of the analyzing branch.
The Virtual Rotator is a wire-layer building that displays the following object rotated by 90 degrees clockwise inputted from the following shape. It can be continued further through the analyzing branch as an output.